Convert steres to cords

Explanation

From this page you can convert steres to cords simply, by using the application above.

In case you are wondering, to convert from steres to cords you need to multiply by 0.2759. This factor is calculated using the respective definitions of the two units you can find below.

Formula

1 st≈0.2759 cords

steresst

dimension	volume
symbol	st

The stere (st) is a unit of volume.

While it is not recommended by the BIPM, the unit is still used to measure volumes of firewood in country where the metric system is in use. Canada does not use the word stere but the cubic meter which represents the same volume.

Definition of the stere

One stere is equal to one cubic meter.

Equivalences

One stere is also equivalent to:

Wood related units

board foot	144 cu in
cubic ton	40 cu ft
cord	128 cu ft
stere	1 m³

cords

dimension	volume

The cord is a unit of volume.

The unit is used in Canada and the United States to measure quantities of firewood.

Definition of the cord

128 cubic feet of stacked roundwood (whole or split, with or without bark) containing wood and airspace, with all the pieces of similar length and lined up on approximately the same direction.

Glossary of Forestry Terms p. 4

Value in terms of the SI

One cord is equivalent to 3.624556363776 cubic meters.

Equivalences

One cord is also equivalent to:

3.2 cubic tons of timber

Wood related units

board foot	144 cu in
cubic ton	40 cu ft
cord	128 cu ft
stere	1 m³